Sheet 01 — Technical Drafting

AS1100 Technical
Drawing Set

A collection of fully dimensioned, standards-compliant engineering drawings modelled in SolidWorks and drafted to the AS1100 Australian technical drawing standard — spanning small machined components, a plastic part, and a full structural steel weldment.

Role
CAD Modelling & Drafting
Software
SolidWorks
Standard
AS 1100
Year
2026
AS1100 drawing sheet for the workshop bench weldment, showing the isometric assembly view, balloon callouts and bill of materials.
01 / 06

Overview

This set was built to practise reading and producing drawings to the AS1100 standard — the drafting convention used across Australian engineering and manufacturing. Each sheet follows a consistent A3 title block of my own design ("Kye Jackson Design"), with drawn/checked/approved fields, tolerancing (linear ±0.5, angular ±0.5°), material callouts, and drawing numbers.

The set moves across a deliberate range of drafting challenges: a machined combination spanner, a cast timing gear with full gear-parameter tables, a turned clamp collar, an injection-moulded chess rook, and — the most involved sheet — a two-page structural steel workshop bench weldment with a full bill of materials and welding callouts to AS/NZS 1554.1.

02 / 06 — Dwg. 020726P05

Combination Spanner

A cast alloy steel combination spanner — 116mm long, 7mm thick, with an 82mm centre distance between the open jaw and the 20mm across-flats hex ring. Drawn 1:1 with a 2:1 detail view of the open-end jaw.

Render of the combination spanner with a cast surface finish.

Render

AS1100 drawing sheet 020726P05 for the combination spanner.

Dwg. 020726P05 Open PDF ↗

03 / 06 — Dwg. 020726P13

Timing Gear

A cast carbon steel timing gear carrying a full parameter table on the sheet: module 2, 24 teeth, 20° pressure angle, 48mm pitch circle diameter, 2.00/2.50mm addendum and dedendum, involute 20° full-depth tooth form. Drawn with a section through the rim and 2:1 details of the tooth flank and the keyed hub.

Render of the timing gear showing the spoked web and keyed central bore.

Render

AS1100 drawing sheet 020726P13 for the timing gear, including the gear parameter table.

Dwg. 020726P13 Open PDF ↗

04 / 06 — Dwg. 010726P21

Clamp Collar

An alloy steel split clamp collar — Ø53mm outside, Ø35mm bore, 9mm wide, with a 1.50mm split and six 1.00 × 45° chamfers. Drawn at 2:1 with a full section view through the counterbored Ø6/Ø4 clamping screw holes.

Render of the split clamp collar showing the through-split and counterbored screw holes.

Render

AS1100 drawing sheet 010726P21 for the clamp collar, including section A-A.

Dwg. 010726P21 Open PDF ↗

05 / 06 — Dwg. 020726P25

Chess Rook

An ABS plastic rook, 45mm tall on a Ø14mm base, with the body built from opposing R15 sweeps and R1.50 bead edges. Drawn at 2:1 with a full section through the piece and a 5:1 detail of the 24°, 5mm-wide crenellation slots — the only purely geometric part in the set, included to practise curve-heavy dimensioning.

Render of the ABS chess rook showing the crenellated top and beaded base.

Render

AS1100 drawing sheet 020726P25 for the chess rook, including section A-A and the 5:1 crenellation detail.

Dwg. 020726P25 Open PDF ↗

06 / 06 — Dwg. 040826P01

Workshop Bench Weldment

The most complex sheet in the set: a two-page structural steel workshop bench, welded from 60x60x4 RHS to AS/NZS 1163 Grade C350L0 and hot-dip galvanised to AS/NZS 4680. Drawn at 1:20 with a full item/quantity/angle/length bill of materials, all-round 6mm fillet welds specified to AS/NZS 1554.1 weld category GP, and 1:5 detail views of the corner bracket and end-cap.

AS1100 drawing sheet 040826P01 page 1 — isometric view of the workshop bench with the bill of materials.

Sheet 1 — Assembly & BOM Open PDF ↗

AS1100 drawing sheet 040826P01 page 2 — elevations with corner bracket and end-cap detail views.

Sheet 2 — Elevations & details Open PDF ↗

Next Sheet

Transom Boarding Step →